Call : +1-204-992-3200

E-mail :info@ultraspan.ca

   
 
 
Recent Projects
FPL Point Fitness Center     High Ridge Imagine Charter School       Fort Storage Wall Panels      Fairfield Hotel       Condo Lindenwoods     MIC Earlington Heights.
Hollowcore Saws

Ultra-Span saws are workhorses of the industry - capable of performing 90º cross cuts, 180º rip cuts, and angle cuts left or right directly on the casting bed.

Features and Benefits:

SMA-400-360

The Ultra-Span SMA-400-360 Multi-Angle Saw is capable of performing 0-180° cross cuts and longitudinal rip cuts at any position on the slab directly on the casting bed.

Increased versatility and greater design flexibility for your hollowcore jobs.

Cross cuts accomplished in as little as one minute-5 seconds. Laser light guidance allows for fast setup and greater accuracy of cut. Digital angle display included. Fully hydraulic controlled operation.

Safe working platform. Extremely low maintenance with no PLC's means higher uptime for your operations.

SCC-400

The Ultra-Span SCC-400 Saw is a compact "mini" saw designed to perform 90° cross cuts with extremely low maintenance costs.

Hydraulic controlled motions allow blade speeds to be preset during installation, virtually eliminating blade damage due to operator error, therefore greatly increasing blade life and reducing the cost per cut.

Laser light guidance allows for fast setup and greater accuracy of cut.

A roller cage is incorporated into the carriage which protects the carriage and frame components from dirt and debris, and provide an extra degree of safety for the operator.

SMA-300

The Ultra-Span SMA-300 Multi-Angle Saw is capable of performing 90° cross cuts, 180° rip cuts, and angle cuts up to 45° left or right directly on the casting bed.

Increased versatility; one saw capable of cutting 15cm (6in) to 40cm (16in) slabs. Provides greater design flexibility for your customer.

Cross cuts accomplished in as little as one minute-5 seconds. Longitudinal rip cuts as rapid as 7.6m (25ft)/minute. Laser light guidance allows for fast setup and greater accuracy of cut.

Safe working platform, excellent visibility. Extremely low maintenance.

SCR-300

The Ultra-Span SCR-300 Cross/Rip Cut saw is capable of performing 90° cross cuts and 180° rip cuts directly on the casting bed.

Increased versatility; one saw capable of cutting 15cm (6in) to 40cm (16in) slabs. Provides greater design flexibility for your customer.

Cross cuts accomplished in as little as one minute-5 seconds. Longitudinal rip cuts as rapid as 7.6m (25ft)/minute. Laser light guidance allows for fast setup and greater accuracy of cut.

Safe working platform, excellent visibility. Extremely low maintenance.